[Contents] [Introduction] [Preferences ] [Operation] [Maps] [Telnet] [FAQ]
OmniRig and DX Monitor
OmniRig has been tested with the following configurations. If you have successfully configured OmniRig with DX Monitor, please let us know so we can add the information to the list.
Rig | Interface | Baud | Data | Parity | Stop | RTS | DTR | VFO | Comments |
FT-857D | CT-62 | 9600 | 8 | N | 1 | Low | Low | VFO | Must use VFO not A or B |
FT-950 | RS-232 | 9600 | 8 | N | 1 | High | High | VFO A | |
FT-1000 | j•Com | 4800 | 8 | N | 2 | High | High | VFO A VFO B |
External power required with some notebooks |
IC-7000 | USB | 9600 | 8 | N | 1 | High | High | VFO | jcc368 eBay cable |
IC-706MKII | CT-17 | 9600 | 8 | N | 1 | Handshake | High | VFO | |
IC-725 | W1GEE | 1200 | 8 | N | 1 | High | High | VFO | |
IC-781 | RIGblaster M8 | 4800 | 8 | N | 1 | Low | Low | VFO | |
TS-50 | W1GEE | 4800 | 8 | N | 2 | High | High | VFO A VFO B |
External power required with some notebooks |
TS-2000 | RS-232 | 9600 4800 |
8 | N | 1 2 |
High | High | VFO A VFO B |
Please send a message with settings that you have found to work.
[Contents] [Introduction] [Preferences ] [Operation] [Maps] [Telnet] [FAQ]